Wheel-hub-bearing-unit-for-Chrysler Dodge Plymouth-513089

Fit Vehicles /Application :Chrysler Dodge Plymouth-CHRYSLER 300M,CONCORDE

INTREPID,LHS,NEW YORKER,PROWLER,DODGE INTREPID,EAGLE VISION

PLYMOUTH PROWLER

AOZ NO:LD044

OE Numbers:513089

Cross Reference Numbers:

Certification: IATF 16949:2016

Quality Guarantee: 2 years or 60000 kilometers

FAQs

Q1: Can I use a standard socket to tighten the axle nut?

A: You can use a standard socket, but you must use a calibrated torque wrench to achieve the exact manufacturer specification. Never use an impact wrench for final tightening, as it can easily crush the bearing and destroy the internal pre-load.

Q2: How do I know if the ABS sensor is integrated into the hub or separate?

A: Integrated hubs have a visible magnetic ring on the inner seal and often a wire connector built into the housing. Separate sensors are mounted externally on the steering knuckle and point toward a toothed ring on the axle or hub.

Q3: Does driving through deep water or pressure washing affect bearing life?

A: Yes. Rapid temperature changes from water can create a vacuum effect inside the bearing, sucking moisture past the seals. This causes the internal grease to emulsify, leading to premature rust and wear.

"Quality First, Customers First",  "AOZ" committed to providing reliable products and long-term support to help our partners succeed.